[1]李 旭,杨小天*.喷墨打印技术制备透明电极[J].吉林建筑大学学报,2019,(03):83-86.
 LI Xu,YANG Xiao-tian*.Transparent electrodes prepared by inkjet printing technology[J].Journal of Jilin Jianzhu University,2019,(03):83-86.
点击复制

喷墨打印技术制备透明电极(/HTML)
分享到:

《吉林建筑大学学报》[ISSN:2095-8919/CN:22-1413/TU]

卷:
期数:
2019年03期
页码:
83-86
栏目:
信息科技
出版日期:
2019-06-25

文章信息/Info

Title:
Transparent electrodes prepared by inkjet printing technology
文章编号:
2095-8919(2019)03-0083-04
作者:
李 旭杨小天*
(吉林建筑大学 电气与计算机学院,长春 130118)
Author(s):
LI XuYANG Xiao-tian*
(School of electrical and computer engineering,Jilin Jianzhu university,Changchun 130118,China)
关键词:
显示面板喷墨打印透明电极
Keywords:
display panelinkjet printingtransparent electrode
分类号:
TB 34
文献标志码:
A
摘要:
随着市场上对柔性显示面板的关注度逐渐升高,对可弯折、透光率高、导电性好的透明电极需求越来越大.本文利用喷墨打印技术制备了透明电极,同时通过控制间隙距离、打印电压、打印速度、固化时间和温度等工艺参数,得到了透明电极光电性能随固化温度和线宽间隙的变化规律.根据上述变化规律分别给出最优固化温度和最佳线宽间隙距离,制备得到了光电性能良好的透明电极.
Abstract:
With the increasing attention on flexible display panels in the market,there is a growing demand for flexible,transparent electrodes with high transmittance and good conductivity.In this paper,transparent electrodes were fabricated by inkjet printing technology.At the same time,by controlling the technological parameters such as line gap distance, printing voltage,printing speed,curing temperature and curing time,the rules of photoelectric properties of transparent electrodes changing with curing temperature and line gap distance were obtained.Then,the optimum curing temperature and line gap distance were given according to the above changing rules,and the transparent electrodes with good photoelectric properties were prepared.

参考文献/References:

[1] Wiley Benjamin,Sun Yugang,Xia Younan.Synthesis of silver nanostructures with controlled shapes and properties[J].Accounts of Chemical Research,2007,40(10):1067-1076.
[2] 肖友鹏,熊志华,周明斌.CIGS 薄膜太阳能电池结构分析[J].电子元件与材料,2014,33(11):18-23.
[3] 龚秀,蒋玉荣,李萌.柔性有机太阳能电池研究状况及发展趋势浅析[J].电子元件与材料,2014,33(10):1-6.
[4] 章峰勇.柔性透明导电膜的研究进展[J].信息记录材料,2010,11(3): 44-51.
[5] 邓志杰.印刷电子学应用市场评价[J].现代材料动态,2009(4):14-15.
[6] 朱登华,李旺,刘石勇.LPCVD 法在制绒单晶硅片衬底上制备ZnO:B透明导电膜及其性能的研究[J].人工晶体学报,2015,44(1):19-23.
[7] 崔征.印刷电子学[M].北京:高等教育出版社,2012.
[8] 林金堵.喷墨打印技术在PCB中的应用前景[J].印制电路信息,2008(4): 9-13.
[9] Vaseem M,Lee K M,Hong A R.Inkjet printed fractal-connected electrodes with silver nanoparticle ink[J].Applied Materials and Interfaces,2012,4(6):3300-3307.
[10] Kang J S,Ryu J,Kim H S.Sintering of inkjetprinted silver nanoparticles at room temperature using intense pulsed light[J].Journal of Electronic Materials,2011,40(11):2268-2277.
[11] Huang Q,Shen W,Song W.Synthesis of colourless silver precursor ink for printing conductive patterns on silicon nitride substrates[J].Applied Surface Science,2012,258(19):7384-7388.
[12] KAYDANOVA T,MIEDANER J D,PERKINS C.Direct-write inkjet printing for fabrication of barium strontium titanate-based tunable circuits[J].Thin Solid Films,2007,515(7/8):3820-3824.
[13] 曾跃武.Ag纳米线的一步法合成和导电性能原位测量[J].电子显微学报,2014,33(5):419-422.
[14] 陈寒元,高燕,张怀若.银纳米线中五次孪晶结构的透射电镜研究[J].电子显微学报,2004,23(4):389-389.
[15] Nie X,Wang H,Zou J.Inkjet printing of silver citrate conductive ink on PET substrate[J].Applied Surface Science,2012,26(14):554-560.

备注/Memo

备注/Memo:
收稿日期:2019-03-01
作者简介:李 旭(1993~),男,河南省焦作市人,硕士研究生.
更新日期/Last Update: 2019-06-25